Can a 10 Inch Miter Saw Cut a 4×4 Stock?

miter saw cut 4x4

Can a 10 inch miter saw cut a 4×4 stock?

Of course, it can!

But it will take more require more effort and it isn’t an efficient way to carry out such a cut.

A 12-inch saw would be a better tool for this task.

The blade of a miter saw has its cutting capacity, but this isn’t just dependent on the dimensions of the blade.

You want to consider factors like the power of the motor, the kerf of the saw and many others.

Do you intend to cut a 4×4 stock using a 10-inch saw?

Well, you are in luck.

This piece was put together to help you achieve such an unorthodox task.

Let’s get down to it quickly.

What You Need For This Task:

  1. Miter Saw
  2. Pencil
  3. Square
  4. Protective goggles
  5. Earmuffs

Cutting a 4×4 using a 10-inch saw isn’t advisable for a lot of reasons.

There is the possibility of a kickback from the saw, the process is stressful & time-consuming, and the torque of the 10-inch saw isn’t suited for tasks of this kind.

Obviously, it is not an efficient way of cutting a 4×4 stock.

If you still want to go ahead and use the 10-inch saw to cut the 4×4 stock, we are here to assist you.

Steps by Step Instructions

To ensure you encounter no problems why using the 10-inch saw in cutting the 4×4 – an unconventional task – we have put together these set of instructions.

Follow these instructions and you will have no challenges doing this unusual task.

  • Step 1: Mark the stock accordingly

can a 10 inch miter saw cut a 4x4 stock

Before you start making that cut, you need to mark the stock accordingly.

With measurements you must have earlier made, you can mark the 4×4 stock easily using a pencil.

  • Step 2: Configure the sawWith the stock accurately marked, you will need to prep the saw for the task ahead.Place the machine on a suitable workbench and calibrate the angle of the saws blade to a perfect 90°.Use the square to confirm the accuracy of the angle.
  • Step 3: Position the StockPlace the stock on the table of the miter saw so that the marked area is directly under the effect of the saw.
  • Step 4: Cut the 4×4 stock

This is the rate determining step of this process.

Put on your protective gear to avoid any health challenges.

Turn on the saw and bring down the blade on the 4×4 stock.

You have to do this gently so the saw doesn’t suffer a kickback.

Due to the size of the stock, you will have to do this cutting through the four sides.

Don’t attempt to complete the cut through just one surface.

Turn the stock on its four sides and complete the cutting process.


Hopefully, you were able to navigate cutting the 4×4 stock with a 10-inch miter saw using this guide.

Despite the attributes of a miter saw, a 10-inch saw would often struggle when cutting stock with 4×4 dimensions.

But the deed is done. You did it!

If you want more information on this subject or have questions you would like us to respond to, leave a comment below and we would get back to you quickly.

If you found this tutorial, don’t hoard it, please share.

Read more: How to Unlock a Miter Saw?

Recent Posts